[NSRCA-discussion] Charger help please

[Earl Haury]

The iCharger 4010 Duo is hard to beat (color code the balance connectors). 
It'll handle a pair of 10S packs and charge each up to 40A with enough power 
supply @ 24v. Essentially 2 chargers in one box. Another option is a pair 
(redundancy) of  iCharger 3010's on 24V  - each will handle 10S on one 24v 
supply. I've years of service from my 3010's after less than satisfactory 
experience with Cell-Pros (it is nice they're not polarity critical of 
balance leads though).

Progressive RC usually includes the balance boards, EPBuddy trends to have 
deals with parallel boards with the iChargers, both give good service.

Earl

-----Original Message----- 
From: Jas S via NSRCA-discussion
Sent: Friday, February 10, 2017 7:06 AM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Charger help please

Looking for a super charger for my 10S packs. I've lost confidence in my 
Cell-Pro 10XP's after 4 of them (2 new ones) all had a variety of issues 
that caused them to stop working.

Needs to charge a 10S+ pack
Fast charging since I have 24+ volt power supplies
Easy (enough to use that this dummy can figure it out
I don't need to know more than:
Mah, volts, ir. Anything more I don't care about

Thanks,
Jason

Jas iP
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion