[NSRCA-discussion] HXT 4mm connectors

Joe Lachowski jlachow at hotmail.com
Mon Apr 3 12:21:18 AKDT 2017


I'd also like to add that the ones that I got through Amazon were crap.


________________________________
From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> on behalf of Joe Lachowski via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
Sent: Sunday, April 2, 2017 6:56 PM
To: Atwood, Mark; General pattern discussion
Subject: Re: [NSRCA-discussion] HXT 4mm connectors


I have been using the  Schulze version for years. They are no longer available. I have tried others and had mixed results.  I recently got the latest ones that F3AUmlimited sells. They are by far the best and easiest to assemble to date. I think Mike found a good quality supplier on these.


I separate the cases from each other.  I use the female as my negative lead and spray paint them Black. The two leads that I interconnect the packs with are wrapped with blue painters tape to remind me which ones need to be connected to each other otherwise you know what happens.


________________________________
From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> on behalf of Atwood, Mark via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
Sent: Sunday, April 2, 2017 5:09 PM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] HXT 4mm connectors

I’m looking to convert all of my equipment to the HXT 4mm Bullet connectors (Red housings).  Can someone that is using them tell me what the standard convention is for wiring these?  It would appear from photos (Hobby king) that the battery side is putting the positive lead on the male bullet (larger housing) and the neg lead on the female bullet (smaller housing).  Is that what most are doing?    Feels backwards to me, but I want to match conventions so I can buy prewired stuff in the future.

-Mark
MARK ATWOOD
o.  (440) 229-2502
c.  (216) 316-2489
e.  atwoodm at paragon-inc.com<mailto:atwoodm at paragon-inc.com>

Paragon Consulting, Inc.
5900 Landerbrook Drive, Suite 205, Cleveland Ohio, 44124
www.paragon-inc.com<http://www.paragon-inc.com/>

<http://www.paragon-inc.com/>
Powering The Digital Experience

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20170403/404e564a/attachment.html>


More information about the NSRCA-discussion mailing list