[NSRCA-discussion] Braking question

[Keith Hoard]

Yeah, the Nats would be out of control!!!

Sent from my Windows 10 phone

From: John Pavlick via NSRCA-discussion<mailto:nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, March 1, 2016 12:19
To: 'General pattern discussion'<mailto:nsrca-discussion at lists.nsrca.org>
Subject: Re: [NSRCA-discussion] Braking question

The reason this is so touchy BTW is because you guys are using sensor-less brushless motors. Commutation takes place in the speed control. This works fairly well when the speed controller is driving the motor. When it’s the other way around however – not so much. I bet if someone came out with a motor that had position sensors and a really expensive speed controller to drive it, more people would get  interested in Pattern again… LOL



John Pavlick

Cell: 203-417-4971



idslogo2

Integrated Development Services



From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of David Harmon via NSRCA-discussion
Sent: Tuesday, March 01, 2016 10:28 AM
To: 'Jon Lowe'; 'General pattern discussion'; 'Jamie'
Subject: Re: [NSRCA-discussion] Braking question



This is exactly my experience as well.



David Harmon

Sperry, OK



From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jon Lowe via NSRCA-discussion
Sent: Tuesday, March 1, 2016 7:48 AM
To: Jamie <jstrong49923 at gmail.com>; NSRCA <nsrca-discussion at lists.nsrca.org>
Subject: Re: [NSRCA-discussion] Braking question



ESC dependent. Castle ESC braking doesn't work well over 30% in my experience, without screeching. I set my OS controller at 65%, and it works fine. Jason goes as high as 90% with an OS. Some other controllers don't work well with braking at all, such as the YEP controllers from HobbyKing.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20160301/97e2b785/attachment.html>
-------------- next part --------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion