[NSRCA-discussion] CF End Grain sheet for Servo/Battery tray?

[Ronald Van Putte]

I have been using trays made from 1/8" 5-ply plywood, with 6mm carbon fiber tubes down the sides.

Ron

> On Jan 26, 2016, at 2:27 PM, Stuart Chale via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
> 
> I like 1/8" fiberglass end grain balsa sheet. Still pretty light and strong and probably cheaper than the carbon fiber equivalent. 
> 
> Sent from my iPhone
> 
> On Jan 26, 2016, at 2:24 PM, Larry Diamond via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> 
>> 
>> What are you using for Servo/Battery trays and where is the best source?
>> 
>> Larry Diamond
>> 
>> 
>> Sent via the Samsung Galaxy S® 6, an AT&T 4G LTE smartphone
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion><Mail Attachment.txt>_______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20160126/f357192a/attachment.html>