[NSRCA-discussion] HP Server Power Supplies

[Ronald Van Putte]

Thanks Ed - This confirms my experience with these two power supplies.  It also says that the HP Part No:  438203-001 power supply is a “newer variant” of the HP DPS-1200FB power supply.

These are potent little buggars!

Ron
 
> On Aug 12, 2016, at 3:51 AM, Ed Alt <ed_alt at hotmail.com> wrote:
> 
> Ron:
> 
> On the assumption that all HP Common Slot supplies would share a common pinout to control on/off, load sharing etc, this next RC Groups thread seems to confirm that pins 33 and 36 control on/off.  3rd post on the page.
> 
> http://www.rcgroups.com/forums/showthread.php?t=1005309&page=223 <http://www.rcgroups.com/forums/showthread.php?t=1005309&page=223>
> A simple high quality 12Volt 100Amp Power Supply- Part1 ... <http://www.rcgroups.com/forums/showthread.php?t=1005309&page=223>
> www.rcgroups.com <http://www.rcgroups.com/>
> Build Log A simple high quality 12Volt 100Amp Power Supply- Part1 Batteries and Chargers
> 
> 
> Ed
> 
> 
> From: Ronald Van Putte <vanputter at gmail.com <mailto:vanputter at gmail.com>>
> Sent: Friday, August 12, 2016 12:35 AM
> To: Ed Alt
> Cc: General pattern discussion
> Subject: Re: [NSRCA-discussion] HP Server Power Supplies
>  
> Thanks Ed - I searched on Google, Bing and eBay to find some specs and didn’t really find anything useful.
> 
> The url you provided answered some of my questions, but not all of them.
> 
> After posting my earlier request for assistance, I found that the HP DPS-1200FB power supply is used with the ProLiant DL580 server, while the HP Part No:  438203-001 power supply is used with the ProLiant DL180 and DL785 servers.
> 
> I have not yet been able to determine all the ways in which the two power supplies are different, despite their apparent identical power output.
> 
> Ron
> 
>> On Aug 11, 2016, at 8:16 PM, Ed Alt <ed_alt at hotmail.com <mailto:ed_alt at hotmail.com>> wrote:
>> 
>> Ron:
>> 
>> Using HP 490594-001 as the search terms for Google, it turned up a number of hits.  I didn't check them all, but this one as an example looks promising, with data sheets and support manuals available for download.  It appears that the HP Common Slot power supply technology 3rd edition manual might answer your question
>> 
>> http://www8.hp.com/us/en/products/oas/product-detail.html?oid=4071890 <http://www8.hp.com/us/en/products/oas/product-detail.html?oid=4071890>
>> HPE 1200W Common Slot Platinum Hot ... - HP® Official Site <http://www8.hp.com/us/en/products/oas/product-detail.html?oid=4071890>
>> www8.hp.com <http://www8.hp.com/>
>> Looking to reduce energy cost and space with increased performance? HP Common Slot Power Supplies share a common electrical and physical design that allows for hot ...
>> 
>> 
>> 
>> Hope this helps!
>> 
>> Ed
>> 
>> 
>> From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>> on behalf of Ronald Van Putte via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
>> Sent: Thursday, August 11, 2016 12:40 PM
>> To: General pattern discussion
>> Subject: [NSRCA-discussion] HP Server Power Supplies
>>  
>> I have been converting server power supplies for our use for several years.  For the last year or so, I have been converting HP DPS-1200FB power supplies.  This power supply provides up to 75 amperes at 12 volts and they are about the size of a paperback book. 
>> 
>> Recently, I ran across another HP server power supply.  There is no model number on this power supply.  Instead, on it is the following:  Regulatory Model No: HSTNS-PL11, Generic Part No:  490594-001, Part No:  4382032-001 and Spare Part No: 498152-001.  This power supply is the same size/shape as the DPS-1200FB and is also rated for 75 amperes at 12 volts. 
>> 
>> I think it’s strange that HP produced two server power supplies with the same same size/shape and performance.  Also curious is that the conversion process required to turn on the two power supplies is different.  The only conclusion I can come up with is that they were designed to be used with different servers, with different “turn on” circuitry.
>> 
>> Does anyone have more information about these two server power supplies?
>> 
>> Ron Van Putte
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20160812/6d28ecd5/attachment.html>