[NSRCA-discussion] Stripping old paint

[Randy Forbus]

Ive use aircraft stripper that you can buy at auto zone, I used it on thin fiberglass without issue, might want to test it out on a small area first, it comes in a spray can, but it does very well.


________________________________
From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> on behalf of Michael Cohen via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
Sent: Thursday, November 26, 2015 1:45 PM
To: NSRCA
Subject: [NSRCA-discussion] Stripping old paint

My winter project will be resurrecting an old .46 sized pattern like plane called the Fakeout from the basement graveyard.  I will be converting the model to electric and want to remove the old paint that was used on the fuse.  Is there a paint stripper that can remove the paint without damaging the balsa?  I assume this would be better than sanding it off, but I could be wrong.

Oh, and happy Turkey Day everyone!

Regards,
Mike Cohen
D4
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20151126/1276f11e/attachment.html>