[NSRCA-discussion] MK Tail Wheels

[Earl Haury]

Ron

I’ve been using DuBro 3/4” tail wheels on the MK assembly forever. I drill the hub to fit, bevel the side that goes toward the bend (saves some space), solder a washer on for a retainer, and add a drop of CA to keep the tire on the hub. 

Earl

From: Ron Hansen via NSRCA-discussion 
Sent: Monday, May 25, 2015 7:21 PM
To: NSCRA Discussion List 
Subject: [NSRCA-discussion] MK Tail Wheels

Anyone know where I can get MK Tail Wheels or similar.  I don’t want the whole assembly just the wheel.  The length of the MK tail wheel axle is rather short so most standard tail wheels won’t fit with a wheel collar to secure them.   The MK wheels are real skinny.

 

Thanks

 

Ron

 

 



__________ Information from ESET Smart Security, version of virus signature database 11684 (20150525) __________

The message was checked by ESET Smart Security.

http://www.eset.com



--------------------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150526/78a0f7ef/attachment.html>