[NSRCA-discussion] JR and Flight modes

[Peter Vogel]

Been a while since I did that level of JR programming, but as I recall it was similar to the way my Jeti does it where curves, etc can be set to global (regardless of flight mode) or 'single' -- per-mode.  
Pe

Sent from Outlook




On Tue, Jun 16, 2015 at 2:04 PM -0700, "Stuart Chale via NSRCA-discussion" <nsrca-discussion at lists.nsrca.org> wrote:










I have been flying Futaba, transmitters for pattern since, well forever.
I decided it was time for a new radio and just got a JR 28X.  I have 
been using Futaba flight modes mostly for Spins and snaps but can't seem 
to get the programming on the JR to behave the way i want.
The default airplane program has 3 flight modes on the switch that I 
would want, but I really can't get it to control anything.
With Futaba the flight modes are like a different model where everything 
can have its own settings and it takes priority over dual rate settings etc.

So far for the JR I have been unable to get it to work that way. For 
example I have three rates set up for Elevator on one of the switches.  
When I change to Flight mode 2 (Snaps)  The dual rate is still active 
and controls the elevator curve.  I am trying to get a different throw 
for the snaps and spins and I expect to have Aileron and Rudder affected 
by the same switch.
Any suggestions to make this work :)


Thanks,
Stuart

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150616/7ae6a1be/attachment.html>