[NSRCA-discussion] FAA Registration begins December 21

[Karl Watts]

OK, so how will this now impact our pattern competitions?  Will we have to now provide proof of registration before we can fly at a contest and have our registration # on our plane?  Does this replace the AMA #?

Karl

From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Scott McHarg via NSRCA-discussion
Sent: Monday, December 14, 2015 11:05 AM
To: General pattern discussion
Subject: [NSRCA-discussion] FAA Registration begins December 21

Well, here it is boys and girls.  It's official and starts next Monday.  The link is for the FAQ's of what's happening.

 You only have to register once and you don't have to individually register all of your models.
You must be able to provide proof of registration and have it on you when flying.
You must have your Registration # (not going to be a N number) in your airplane where it is legible and accessible without the use of tools (aka under your canopy).
If you sell a model, you should update your records. (I don't completely understand this if we aren't registering all of our models individually but, OK)
Registration is $5 but you'll get that back if you register in the first 30 days, I believe.

Have a look at the link and prepare to be upset.....

http://www.faa.gov/uas/registration/faqs/

Scott A. McHarg
VSCL / CANVASS U.A.S. Research Pilot
Texas A&M University
PPL - ASEL

Confidentiality Notice:
This e-mail, including any attachments is the property of Trinity Health and is intended for the sole use of the intended recipient(s). It may contain information that is privileged and confidential.  Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, please delete this message, and reply to the sender regarding the error in a separate email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20151214/8168e94d/attachment.html>