[NSRCA-discussion] For Sale: JM Composites Gaudius Complete Ready-To-Fly (Price Reduction)

[Robert Gainey]

Hey Budd
How do you make that sales pitch in "Redneck" ?

Robert

Sent from my iPhone

> On Sep 13, 2014, at 7:57 PM, David Harmon via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
> 
> Where’s the guard when you need him?
>  
> David Harmon
> Sperry, OK
>  
> From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Chuck Hochhalter via NSRCA-discussion
> Sent: Saturday, September 13, 2014 6:43 PM
> To: Budd Engineering; General pattern discussion
> Subject: Re: [NSRCA-discussion] For Sale: JM Composites Gaudius Complete Ready-To-Fly (Price Reduction)
>  
> Well, the sr71 not being part of deal drops me out.
> 
> Sent from my iPhone
> 
> On Sep 13, 2014, at 6:40 PM, Budd Engineering via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
> 
> For Sale: JM Composites Gaudius Complete Ready-To-Fly with:
> 
> Himax 6330 out-runner motor
> Budd Engineering Electric Soft Mount
> Hacker Spin 99 Controller
> JR3421SA on Elev (2)
> JR9411SA on Aileron (2)
> JR8411A on Rudder (1)
> Jaccio 6.0v Perfect Switch/Voltage Regulator
> GP Spinner w/ Cooling Hole
> 
> The aircraft is in good cosmetic and exceptional flying condition, however in the spirit of full disclosure please note the following:
> 
> The airplane was damaged in a mid-air collision with a “foamie” in June 2012.  The damage was repaired, repainted, and the plane weighs just under 5 kg with Thunder Power 5000 batteries.  The repair had no adverse impact on how the aircraft flies and the airplane is in cosmetically “good” condition (additional pics available upon request).
> 
> The plane has ~200 flights on it and it is very well trimmed out with very little mixing needed.  This aircraft is ready-to-fly, just add your own receiver and motor system battery pack.
>  
> This plane has won numerous Masters Contests in NSRCA D7:
>  
> 2011 - Whittier, Oakdale
> 2012 - Riverside, Miramar, Hollister, & Lancaster
> 2013 - Victorville
> 2014 - Riverside
>  
> Price Reduction
> 
> $1350 complete, ready to fly, just add your own receiver and motor batteries.
> $950, airframe only with motor mount and spinner.
> 
> Additional pictures available upon request.
> 
> It is also available for pickup in Lancaster, CA or I will drive a reasonable distance (~120 miles/2 hours) to meet someone if needed.  Will ship, buyer pays shipping, around $95 to most parts of the country (I have the original shipping crates).
> 
> I can accept payment by cash, PayPal, personal check (if I know you personally), or credit card.
> 
> Please contact me directly off list if interested.
> 
> Thx, Jerry
> 
> Budd Engineering
> jerry at buddengineering.com
> http://www.buddengineering.com
>  
> Note - The SR-71B is not included in this offer.
>  
> <IMG_5577.jpeg>
>  
>  
>  
> 
> Budd Engineering
> jerry at buddengineering.com
> http://www.buddengineering.com
>  
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20140914/87678893/attachment.html>