[NSRCA-discussion] What is the difference between JST-XH/GP/PQ balance plugs

Robert L. Beaubien rob at koolsoft.com
Thu Apr 10 11:53:10 AKDT 2014


Mike, do you have longer 2 cell extensions for ThunderPower packs to JST-XH board?  1 ft would be nice.

Thanx,

-           Robert Beaubien
-           Sr. Software Architect
-           Kool Software LLC

"No trees were harmed in the sending of this message, however a large number of electrons were terribly inconvenienced."

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Mike Mueller
Sent: Thursday, April 10, 2014 11:03 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] What is the difference between JST-XH/GP/PQ balance plugs

Scott your right Power Unlimited Lipos by F3aUnlimited were mostly PQ. Since I took over I've made a decision to switch our newest packs over to JST/XH. It's the most popular since Hobby King uses this plug. Why fight it.
 I think it's like Beta versus VHS in the end even Sony started making VHS and Beta was no more.
 The balance boards on cellpro chargers are GP/KO (Works with Hobby King JST/XH) and TP/PQ. Works with polyquest and thunder power. We sell a lot of simple adaptors that allow you to use different balancers.
 Thanks, Mike


On Thu, Apr 10, 2014 at 12:49 PM, Michael Ramsey <milehipilot at gmail.com<mailto:milehipilot at gmail.com>> wrote:
I've used this source successfully to understand the differences:
http://www.hansenhobbies.com/products/connectors/
They are a resource that seems to cover all balance tap types accept those used by Thunder Power and Flight Power.

On Thu, Apr 10, 2014 at 11:59 AM, Anthony Romano <anthonyr105 at hotmail.com<mailto:anthonyr105 at hotmail.com>> wrote:

IIRC the JST-xh and the PQ are the same spacing and wiring order but the PQ has a locking tab. A JST is the little red one on small foamy packs. TP is much smaller.

Anthony
________________________________
From: precisionaero at hotmail.com<mailto:precisionaero at hotmail.com>
To: nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>
Date: Thu, 10 Apr 2014 09:14:13 -0600
Subject: [NSRCA-discussion] What is the difference between JST-XH/GP/PQ balance plugs
Is there a functional difference between these balance plug types?

Mike Cohen

_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20140410/89f4fc28/attachment.html>


More information about the NSRCA-discussion mailing list