[NSRCA-discussion] flutter again

[George Kennie]

It's an original foamy design with 3D size surfaces, Michael.
It's a progression of my Rad-Tad series


On Fri, Sep 13, 2013 at 5:11 PM, Michael Ramsey <milehipilot at gmail.com>wrote:

> What airplane do you have George?
>
> Michael...
>
>
> On Fri, Sep 13, 2013 at 4:00 PM, George Kennie <geobet4evr at gmail.com>wrote:
>
>> Hi Guys, I'm in need of some experienced advice. I have a large foamy,
>> about the size of a 46 size glow model, but it has servos similar to Hitec
>> HS-65"s, but just a tad stronger. The model flies extremely well except for
>> the fact that it exhibits flutter on all surfaces at speeds above about 30
>> mph. Into the wind maneuvers are not bad as the speed is more easily
>> controlled.
>> I'm thinking that if I put larger servos with stronger holding power I
>> might be able to rectify the condition and I was wondering if someone else
>> might have had a similar experience and corrected the problem using the
>> above mentioned solution?
>> Thanks for any helpful advice,
>>  Georgie
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130913/64980cc1/attachment.html>