[NSRCA-discussion] flutter again

Jay Marshall lightfoot at sc.rr.com
Fri Sep 13 13:11:37 AKDT 2013


Have you sealed the slots with tape or monocoat?

 

Jay Marshall

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of George Kennie
Sent: Friday, September 13, 2013 5:01 PM
To: General pattern discussion
Subject: [NSRCA-discussion] flutter again

 

Hi Guys, I'm in need of some experienced advice. I have a large foamy, about
the size of a 46 size glow model, but it has servos similar to Hitec
HS-65"s, but just a tad stronger. The model flies extremely well except for
the fact that it exhibits flutter on all surfaces at speeds above about 30
mph. Into the wind maneuvers are not bad as the speed is more easily
controlled. 

I'm thinking that if I put larger servos with stronger holding power I might
be able to rectify the condition and I was wondering if someone else might
have had a similar experience and corrected the problem using the above
mentioned solution?

Thanks for any helpful advice,

 Georgie 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130913/e69203d4/attachment.html>


More information about the NSRCA-discussion mailing list