[NSRCA-discussion] Controller

Budd Engineering jerry at buddengineering.com
Fri Sep 6 15:20:37 AKDT 2013


Don't quit your day job...

:)

Sent from my iPhone

On Sep 6, 2013, at 4:09 PM, Michael Cohen <precisionaero at hotmail.com> wrote:

> Going to the contest to fly my pattern plane
> 
> All the ladies say “His flying’s insane!”
> 
> Plugging in my 10S pack with a pop
> 
> Feel the juice spin my 22 inch prop!
> 
> Takeoff beginning now is my call
> 
> Watch all my competitors begin to fall
> 
> Go thru all maneuvers without a hardly a mistake
> 
> Next person up begins to shake.
> 
> I land, the flight is all done
> 
> By me this contest is won!
> 
> 
> 
> Ice Ice controller…. Castle Creations Ice Ice controller….
> 
> 
> From: DaveL322 at comcast.net
> To: nsrca-discussion at lists.nsrca.org
> Date: Fri, 6 Sep 2013 18:34:13 -0400
> Subject: Re: [NSRCA-discussion] Controller
> 
> Minutia here…but…in the interest of clarity.
> 
>  
> 
> The ICE 80 never existed, per se.  The ICE 80 HV did/does exist and will handle up to 12S lipo and does not have a BEC.
> 
>  
> 
> The non HV ICE series of controllers all included a BEC and there were/are 50, 75, 100, and 200 amp ESCs, each of which was also available in a “lite” version.  The standard versions were good for up to 8S lipo, and the lite versions were good for up to 6S lipo.
> 
>  
> 
> For 2M pattern  application, the Edge 80 HV is available in a lite version, and incorporates some additional data logging functions.  And most importantly, it includes an auxiliary channel input that can be programmed for a variety of functions, including use as an arming switch.
> 
>  
> 
> Regards,
> 
> 
> Dave Lockhart
> 
> Team Castle Creations
> 
>  
> 
> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Patrick Harris
> Sent: Friday, September 06, 2013 6:01 PM
> To: General pattern discussion
> Subject: Re: [NSRCA-discussion] Controller
> 
>  
> 
> You can't run 10's on an ICE.
> 
>  
> 
> On Fri, Sep 6, 2013 at 2:58 PM, Randy Forbus <rforbus at hotmail.com> wrote:
> 
> I believe the Edge  80 is a direct replacement for for the Ice 80, as the Ice series are discontinued
> 
> > From: wildwillie3 at hotmail.com
> > Date: Fri, 6 Sep 2013 17:38:51 -0400
> > To: nsrca-discussion at lists.nsrca.org
> > Subject: [NSRCA-discussion] Controller
> > 
> > Hi guys, 
> > 
> > Which castle controller should I be looking at? The ICE 80 or the Edge 80 HV? What's the difference? 
> > 
> > Thanks 
> > Bill
> > 
> > Sent from my iPhone
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
>  
> 
> 
> _______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130906/bbdb2049/attachment.html>


More information about the NSRCA-discussion mailing list