[NSRCA-discussion] list

[Dave Lockhart]

Karl,

 

As noted in part by others –

 

12, 14, and 16 are number of turns of wire on the windings in the motor.

 

All others things equal, more turns (of smaller diameter wire) will reduce the KV (the RPM per volt the motor will run at).

 

For a given motor, lipo, and prop…..you can increase the power by decreasing the number of winds, or increasing the number of lipo cells, or increasing the prop size…..of course you want to stay within the voltage/current ratings of each component.

 

Regards,


Dave

 

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Karl Watts
Sent: Thursday, November 21, 2013 10:53 PM
To: Ihncheol; General pattern discussion
Cc: General pattern discussion
Subject: Re: [NSRCA-discussion] list

 

What is the difference between the Hacker A50-12S vs 14S vs 16S?

Sent from my iPad


On Nov 20, 2013, at 10:18 AM, "Ihncheol" <pnahobbies at sbcglobal.net> wrote:

Go with Hacker A50-12S and 5s 5000mah. Castle edge 100 regular or lite. APC 16x10e.  It will have more than enough power to haul the plane around.  

 

Ihncheol

 

 

Sent from my Samsung Galaxy Note® II




-------- Original message --------
From: Karl Watts <KARLWATT at sarmc.org> 
Date: 11/20/2013 10:05 AM (GMT-06:00) 
To: General pattern discussion <nsrca-discussion at lists.nsrca.org> 
Subject: Re: [NSRCA-discussion] list 



Hey guys.  As Mike said I am from Boise, ID.  I have been flying for about 8 years.  I flew in the Pattern contest that Mike Riggs organized in 2009 and now I am finally committing to get serious.  Just bought the BJ Craft Monolog 70 to build over the winter.  (If any of you guys have this plane send we what you set it up with - motor, esc, servos, battery.  I am thinking about Hacker A50, Castle Ice 100, Hitec 7975, and 5C 5000).

 

DO NOT PICK ON MIKE - I need him as my coach (well, you have to take what you can get here in Boise, LOL)

 

Karl

>>> Ronald Van Putte <vanputter at gmail.com> 11/20/2013 8:29 AM >>>
Oh good!  Now we can pick on Mike as well.

 

Ron

 

On Nov 20, 2013, at 9:24 AM, astropuppy wrote:





Karl is from Boise Idaho, there will be no picking on him without going through me:) Mike Riggs

 

On Wed, Nov 20, 2013 at 8:21 AM, Ronald Van Putte <vanputter at gmail.com> wrote:

Welcome.

Now you're supposed to write something silly so we can all pick on you.  <VBG>

Ron


On Nov 19, 2013, at 10:41 PM, Karl Watts wrote:

> Just joined
>
> Sent from my iPad
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20131122/06cf202e/attachment.html>