[NSRCA-discussion] Transmitter Programming Question
Ronald Van Putte
vanputter at gmail.com
Fri Nov 8 04:40:24 AKST 2013
I must be doing something wrong. I tried using both the gear channel and Aux 6 with the receiver controlled switch (which is a Dimension Engineering 10 amp Battle Switch) and couldn't get the glow to turn on and off with the throttle.
Ron
On Nov 7, 2013, at 9:11 PM, Ronald Van Putte wrote:
> OK. I think I understand. Pmix the throttle to the channel the receiver controlled switch is plugged into and use the throttle as the Pmix switch. Yes?
>
> Ron
>
> On Nov 7, 2013, at 8:28 PM, Jas wrote:
>
>> Pmix throttle to glow plug and set the points to turn on where you want
>>
>> iJason
>> www.jasonshangar.weebly.com
>>
>> On Nov 7, 2013, at 9:04 PM, Ronald Van Putte <vanputter at gmail.com> wrote:
>>
>>> I think I'll just ignore that.
>>>
>>> Ron
>>>
>>> On Nov 7, 2013, at 8:01 PM, Phil S. wrote:
>>>
>>>> Yes, Ron, switch to JR and it's easy!!! lol
>>>> Phil Spelt, KCRC Emeritus, Past President
>>>> AMA 1294 Scientific Leader Member
>>>> SPA L-18, Board Member
>>>> (865)435-1476v, (865)604-0541c
>>>>
>>>> On 11/7/2013 8:17 PM, Ronald Van Putte wrote:
>>>>>
>>>>> I am trying to turn on an onboard glow plug battery on an O.S. .61RF using a receiver controlled switch, so that the glow will be on when the throttle stick position is less than 15% or so and off above that. I am drawing a blank on how to accomplish it.
>>>>>
>>>>> I've used the throttle stick as a switch before to get dual rate rudder, but this is different.
>>>>>
>>>>> I have a Futaba 12 FG transmitter and will be using a Futaba R617 receiver.
>>>>>
>>>>> Are there any useful suggestions out there?
>>>>>
>>>>> Ron Van Putte
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> NSRCA-discussion mailing list
>>>>> NSRCA-discussion at lists.nsrca.org
>>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>>
>>>>>
>>>> _______________________________________________
>>>> NSRCA-discussion mailing list
>>>> NSRCA-discussion at lists.nsrca.org
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20131108/ab35659c/attachment.html>
More information about the NSRCA-discussion
mailing list