[NSRCA-discussion] Transmitter Programming Question

Stuart Chale schale1 at outlook.com
Thu Nov 7 17:34:00 AKST 2013


I am not familiar with a receiver controlled switch but I would think a 
multipoint type mix would work.  Mix throttle to the switch channel so 
that below 15% throttle has a heavy mix in one direction and above 15% a 
heavy mix the other way to turn off the switch.

On 11/7/2013 8:17 PM, Ronald Van Putte wrote:
> I am trying to turn on an onboard glow plug battery on an O.S. .61RF using a receiver controlled switch, so that the glow will be on when the throttle stick position is less than 15% or so and off above that.  I am drawing a blank on how to accomplish it.
>
> I've used the throttle stick as a switch before to get dual rate rudder, but this is different.
>
> I have a Futaba 12 FG transmitter and will be using a Futaba R617 receiver.
>
> Are there any useful suggestions out there?
>
> Ron Van Putte
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>



More information about the NSRCA-discussion mailing list