[NSRCA-discussion] Clown dance

[Jon Lowe]

You're a special case!!

Jon


-----Original Message-----
From: Ronald Van Putte <vanputter at gmail.com>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Fri, Jul 12, 2013 11:07 am
Subject: Re: [NSRCA-discussion] Clown dance


What's so unusual about that?  I do it all the time.


Ron


On Jul 12, 2013, at 10:59 AM, Jon Lowe wrote:


Of course, if the 1/4 rolls were opposite of each other, you'd also end up going the wrong direction!  Doh!

Jon


-----Original Message-----
From: Jon Lowe <jonlowe at aol.com>
To: nsrca-discussion <nsrca-discussion at lists.nsrca.org>
Sent: Fri, Jul 12, 2013 10:57 am
Subject: Re: [NSRCA-discussion] Clown dance


Here's the official description from the FAI rules:
 

F-13.11 Clown Dance with ½ loop, inverted spin, 2½ turns, consecutive two ¼ rolls down
>From upright, pull through a ½ loop into a horizontal line, perform an inverted spin with 2½ turns, perform a vertical
downline, perform consecutively two ¼ rolls, pull through a ¼ loop, exit upright.
 
Says nothing about direction of the 1/4 rolls vs. the spin direction, so that has to be optional.  The description does not say the 1/4 rolls are opposite each other, so they are in the same direction. The aresti also shows them in the same direction.
 
The rules also say this:
 
Lines between consecutive part-rolls must be short and of equal length. Between consecutive
continuous rolls or part-rolls in opposite direction there must be no line.
 
So as I read it, since the part rolls are consecutive, they must have a line between them.  Only if they were opposite would there be no line.
 
Now Jon Carter will probably come into this and rip my analysis apart!!


Jon


-----Original Message-----
From: Stuart Chale <schale1 at verizon.net>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Fri, Jul 12, 2013 10:06 am
Subject: [NSRCA-discussion] Clown dance



Clown dance question in F13
Of course the first question should be who gave it that name and why.

Real question:  Are the 2 1/4 rolls after the spin in the same 
direction, opposite direction or does it matter?  Should there be a 
straight line between the rolls or instantaneous like the spin reversals?

Stuart C.
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion




_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130712/38eb80e0/attachment.html>