[NSRCA-discussion] Jeti Spin 99 Pro

[Scott McHarg]

Nat, I will forward your request to Tom Simes.

Regards,
Scott


On Mon, Jan 14, 2013 at 10:13 AM, Nat Penton <natpenton at centurytel.net>wrote:

>   Scott can you get me off the list – thanks, Nat Penton
>
>  *From:* Scott McHarg <scmcharg at gmail.com>
> *Sent:* Sunday, January 13, 2013 11:30 AM
> *To:* General pattern discussion <nsrca-discussion at lists.nsrca.org>
> *Subject:* Re: [NSRCA-discussion] Jeti Spin 99 Pro
>
>  I want to thank everyone for their input.  It has really helped me and I
> appreciate it.
>
> Scott
>
>
> On Sun, Jan 13, 2013 at 9:11 AM, Jon Lowe <jonlowe at aol.com> wrote:
>
>> Just weighed my OS 1100HV.  With bullet connectors for the motor, battery
>> connector, and a piece of Velcro on the back for mounting, 131 grams.  The
>> motor leads could probably be shortened slightly to save a few grams, but
>> not much else could be done.
>>  Jon
>>   -----Original Message-----
>> From: davel322 <davel322 at comcast.net>
>> To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
>>  Sent: Sat, Jan 12, 2013 10:56 pm
>> Subject: Re: [NSRCA-discussion] Jeti Spin 99 Pro
>>
>>  What ESCs are actually rated vs what they are actually capable of
>> aside.....the Castle Phx ICE2 80HV will easily handle any viable pattern
>> setup....and 100 grams is not to difficult to achieve considering the stock
>> 80HV has long leads that weigh about 45 grams.
>>
>> Regards,
>>
>> Dave Lockhart
>> Team Castle Creations
>>  ------------------------------
>>  *From: *"Scott McHarg" <scmcharg at gmail.com>
>> *To: *"General pattern discussion" <nsrca-discussion at lists.nsrca.org>
>> *Sent: *Saturday, January 12, 2013 12:45:22 PM
>> *Subject: *[NSRCA-discussion] Jeti Spin 99 Pro
>>
>> I am trying to figure out the best ESC to use for my new project.  I have
>> been a Castle guy since my introduction several years ago to electric.  I
>> believe at this point, my best choice is the Jeti Spin 99 Pro mainly due to
>> weight at 100g vs. the other 100A ESCs out there.  I looked at the OS1100
>> and of course the Castle ESC but they are heavier. I have been told good
>> things about the Jeti and the smoothness as well as the braking.  Really, I
>> have two questions: 1. Is there a lighter 100A+ ESC that is of good
>> quality?  2.  How do these get programmed?  It appears there is a little
>> programmer called the Jeti Spin Mini Programmer but can you also use some
>> sort of PC program to program these like the Castle?
>>
>> Thanks for your time.
>>
>> Scott
>>
>> --
>> *Scott A. McHarg*
>> Sr. Systems Engineer - Infrastructure
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>> _______________________________________________
>> NSRCA-discussion mailing listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>
>
>
> --
> *Scott A. McHarg*
> Sr. Systems Engineer - Infrastructure
>
> ------------------------------
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> ------------------------------
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2890 / Virus Database: 2638/6032 - Release Date: 01/14/13
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>



-- 
*Scott A. McHarg*
Sr. Systems Engineer - Infrastructure
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130114/906836bc/attachment.html>