[NSRCA-discussion] Jeti Spin 99 Pro

[Jon Lowe]

Just weighed my OS 1100HV.  With bullet connectors for the motor, battery connector, and a piece of Velcro on the back for mounting, 131 grams.  The motor leads could probably be shortened slightly to save a few grams, but not much else could be done.

Jon


-----Original Message-----
From: davel322 <davel322 at comcast.net>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Sat, Jan 12, 2013 10:56 pm
Subject: Re: [NSRCA-discussion] Jeti Spin 99 Pro



What ESCs are actually rated vs what they are actually capable of aside.....the Castle Phx ICE2 80HV will easily handle any viable pattern setup....and 100 grams is not to difficult to achieve considering the stock 80HV has long leads that weigh about 45 grams.
 
Regards,
 
Dave Lockhart
Team Castle Creations




From: "Scott McHarg" <scmcharg at gmail.com>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Saturday, January 12, 2013 12:45:22 PM
Subject: [NSRCA-discussion] Jeti Spin 99 Pro


I am trying to figure out the best ESC to use for my new project.  I have been a Castle guy since my introduction several years ago to electric.  I believe at this point, my best choice is the Jeti Spin 99 Pro mainly due to weight at 100g vs. the other 100A ESCs out there.  I looked at the OS1100 and of course the Castle ESC but they are heavier. I have been told good things about the Jeti and the smoothness as well as the braking.  Really, I have two questions: 1. Is there a lighter 100A+ ESC that is of good quality?  2.  How do these get programmed?  It appears there is a little programmer called the Jeti Spin Mini Programmer but can you also use some sort of PC program to program these like the Castle?


Thanks for your time.


Scott



-- 
Scott A. McHarg
Sr. Systems Engineer - Infrastructure


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130113/4310bf1f/attachment.html>