[NSRCA-discussion] jr ds8711 servo

[Gordon Seeling]

On 2/12/2013 8:57 AM, mike mueller wrote:
>
> Good point Ron. We've come a long way. I used to use Bonner servo's on 
> my 6 channel MinEx reeds. They were huge and you had to wire them 
> yourself.  Mike
> --- On *Tue, 2/12/13, Ronald Van Putte /<vanputter at gmail.com>/* wrote:
>
>     how about the bonner compound escapement, the more you wound up
>     thr rubber band the faster it was!!
>     From: Ronald Van Putte <vanputter at gmail.com>
>     Subject: Re: [NSRCA-discussion] jr ds8711 servo
>     To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
>     Date: Tuesday, February 12, 2013, 9:38 AM
>
>     When I saw this e-mail, I chuckled.  Can anyone besides me
>     remember when we used the Kraft KPS-18 servo?  As I remember it
>     had 18 in-oz of torque!  It made up for its lack of torque by
>     being slow too.
>
>     Ron Van Putte
>
>     On Feb 12, 2013, at 5:40 AM, Gordon Seeling wrote:
>
>     > has 403oz of torque, same size as standard servo has anyone used
>     it for rudder servo ??
>     > _______________________________________________
>     > NSRCA-discussion mailing list
>     > NSRCA-discussion at lists.nsrca.org
>     <http://us.mc1247.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org>
>     > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>     _______________________________________________
>     NSRCA-discussion mailing list
>     NSRCA-discussion at lists.nsrca.org
>     <http://us.mc1247.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org>
>     http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130212/a04eed4d/attachment.html>