[NSRCA-discussion] HXT 4 mm Connectors

[Daniel Dupont]

That is what I do much easier.

Daniel on MacBook Pro

From:  Keith Hoard <klhoard at hotmail.com>
Reply-To:  General pattern discussion <nsrca-discussion at lists.nsrca.org>
Date:  Thursday, 29 August, 2013 8:06 PM
To:  General pattern discussion <nsrca-discussion at lists.nsrca.org>
Subject:  Re: [NSRCA-discussion] HXT 4 mm Connectors

Yes, cut them off and replace with Anderson Power Poles . . .
 
From: Ron Hansen <mailto:rcpilot at wowway.com>
Sent: Thursday, August 29, 2013 8:03 PM
To: NSCRA Discussion List <mailto:nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] HXT 4 mm Connectors
 
I just received my order of new Zippy Compact 5000 mah 25 C packs.
 
They come with 10 gauge wire.
 
I can¹t get the red HXT 4 mm connector housing (the plastic part) over the
wire insulation.
 
I have some older Zippy packs that use the same red connectors with 10 gauge
wire.
 
Any ideas how you can get the red plastic housing to slip over the 10 gauge
wire?
 
Thanks


__________ Information from ESET Smart Security, version of virus signature
database 8742 (20130829) __________

The message was checked by ESET Smart Security.

http://www.eset.com


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________ NSRCA-discussion mailing
list NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130830/3d6f858f/attachment.html>