[NSRCA-discussion] Genesis

[Vicente Planes]

Combined with really bad servos.  

Sent from my iPhone

On Apr 18, 2013, at 6:08 PM, ehaury <ejhaury at comcast.net> wrote:

> Sure you don't have + expo w a Futaba TX?
> 
> Sent from my iPhone
> 
> On Apr 18, 2013, at 5:57 PM, Randy Forbus <rforbus at hotmail.com> wrote:
> 
>> Besides the cg I would be looking at the wing and stab incidences, .5 positive on the wing is a good place to start and 0 on the stab.
>> 
>> > From: kc2pk at icloud.com
>> > Date: Thu, 18 Apr 2013 16:55:16 -0400
>> > To: nsrca-discussion at lists.nsrca.org
>> > Subject: [NSRCA-discussion] Genesis
>> > 
>> > 
>> > I have recently aquired a Chip Hype Genesis. The plane is powered by aYS 1.40L and balances just ahead of the wing tube with 2.5 oz. lead attached to the rear of the firewall. The problem is that the plane is almost unflyable. I have flown it four times, found it to be all over the sky and have been unable to trim it reliably at all. I have some questions. Where is the CG recommended to be? Has anyone else had this problem. I have been flying for twenty years in pattern and have never had this problem before. I have discussed the problem with my flying buddy, a masters class flyer of great skill, but without resolution. The fact that I have able to land the plane without damage has been nothing short of miraculous. Any help would be appreciated. Fred
>> > Sent from my iPad
>> > _______________________________________________
>> > NSRCA-discussion mailing list
>> > NSRCA-discussion at lists.nsrca.org
>> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130418/ee20b5e4/attachment.html>