[NSRCA-discussion] Castle HV 160
Robert Green
robcase1 at cox.net
Sun Sep 2 08:49:29 AKDT 2012
this was bought after the recall, that was suppose to have the fix
_____
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Peter Vogel
Sent: Sunday, September 02, 2012 9:44 AM
To: General pattern discussion
Cc: General pattern discussion
Subject: Re: [NSRCA-discussion] Castle HV 160
There was a recall notice from Castle months ago with a simple fix for a mfg
defect in the first run of ice2 hv160's that cause the fire.
Peter+
Sent from my iPhone4S
On Sep 2, 2012, at 7:24 AM, "Robert Green" <robcase1 at cox.net> wrote:
Yesterday i had a HV 1.60 burn up in my 89" Slick after flying for 5
minutes. Had four flights earlier in the day and nothing and on the fourth
flight of the day poof. Any one have any idea what's going on with Castle,
I have heard of these catching fire, but thought the folks that were using
either didn't solder the joints properly or were pulling too many amps. My
Set up is a hacker Q80 M 7, pulling 120 Amps wide open throttle. Plane can
be repaired but was looking forward to performing my freestyle routine for
our Labor day air show; not anymore.....
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120902/89450068/attachment.html>
More information about the NSRCA-discussion
mailing list