[NSRCA-discussion] Generator question

Anthony Cornacchione acornacchione at hotmail.com
Fri May 11 13:56:17 AKDT 2012


A mist zone fan. 

Sent from my iPhone

On May 11, 2012, at 5:43 PM, "Keith Hoard" <khoard at gmail.com> wrote:

> A stationary bike?
> 
> Sent from my iPhone
> 
> On May 11, 2012, at 15:27, Pete Cosky <pcosky at comcast.net> wrote:
> 
>> Or a blender with tasty beverages...
>> 
>> Sent from my mobile device
>> 
>> On May 11, 2012, at 5:25 PM, "Dave Burton" <burtona at atmc.net> wrote:
>> 
>>> Why not try using a small soldering iron instead of the drill?
>>>  
>>> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Michael Cohen
>>> Sent: Friday, May 11, 2012 5:20 PM
>>> To: NSRCA
>>> Subject: [NSRCA-discussion] Generator question
>>>  
>>> OK, I did not (yet) buy a Honda or Yamaha generator.  I picked up one from the neighbors friend for $75, so I figured I would give it a whirl.  I did test run it last year and it was relatively quite and not too heavy.  I figured if I keep lifting it, I might get as buff and Anthony Abdullah.
>>>  
>>> Anyway, I hooked up the power supply/chargers to it and nothing.  I tried my old Triton 2, nothing.  Maybe the output is not stable enough.  I read the directions again and it says for low load (250W or less), try moving the lever half way to the choke position.  Nothing.  I figured, what the hell, hooked up a drill to it.  Power!  OK, so now I hook up the Triton 2 and the drill and run the drill.  Power to the charger!  Seems without sufficient load being called for, the generator does not put out.  I am not electrically inclined, but is there something I can do to at least use the generator until I find a good deal on a Honda?  Having me stand there with a drill the whole time I am charging does not sound appealing.
>>>  
>>> Mike C
>>> D4
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120511/98198525/attachment.html>


More information about the NSRCA-discussion mailing list