[NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC

[Robert Green]

thanks Andrew

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Andrew Jesky
Sent: Sunday, March 18, 2012 12:00 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC

 

This shouldn't be any issue, I fly a 730 as well and can fly 6-7 flights and
it is never below 7.4volts.

 

Andrew 

Sent from my iPhone


On Mar 18, 2012, at 10:57 AM, "Robert Green" <robcase1 at cox.net> wrote:

Another question regarding the 7008Sb receiver.  The rx allows you to set
the failsafe voltage.  my failsafe was set to 7.2 volts.  When using a 2
cell lipo (TP 730), is it possible for my voltage to fall below 7.2 volts
for a second or two and cause the receiver to go into failsafe?  I normally
fly 4 or 5 flights then i pack it up for the day.  I usually use about 40
mah per flight.

 

thanks,

 


  _____  


From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bob Richards
Sent: Saturday, March 17, 2012 4:46 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC

 



--- On Fri, 3/16/12, Ronald Van Putte <vanputte at cox.net> wrote:

 

I hope we're not going to get into a Futaba vs JR p---ng contest. 

 

Sadly, its too late.

 

 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120318/5291a402/attachment.html>