[NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC

[Derek Koopowitz]

This is NOT a Futaba issue.  I resent the fact that several of you seem to
feel that Jeti is a Futaba product and should work perfectly with Futaba
equipment.

On Fri, Mar 16, 2012 at 12:38 PM, Phil S. <chuenkan at comcast.net> wrote:

> **
> Jon, how else would they boost their equipment sales?  If the new stuff
> was backwards compatible (as, BTW, DSMX is with DSM2) everyone would keep
> using their old, perfectly good stuff instead of replacing it with new...
>
> On 3/16/2012 12:22 PM, Jon Lowe wrote:
>
> Is this worth a shot?
>
> http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8356
>
> It's disappointing that after the various radio manufacturers standardized
> wiring, signal timing, etc. for servos, that Futaba would move, again, in
> this direction.  They should make clear in their advertising that their new
> receivers may not be compatible with equipment you already have.  Should be
> considered a design defect.  All this does is hurt the customers.
>
>  Jon
>
> --
> Phil Spelt, KCRC President
> AMA 1294 Scientific Leader Member
> SPA 177 Board Member
> (865) 435-1476v, (865) 604-0541c
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120316/61f9c464/attachment.html>