[NSRCA-discussion] Neu Gearbox Grease Question

[Whodaddy Whodaddy]

Be careful tightening up the bolts to the gear box the hex bolt doesn't go to the end of the threads in the hole and it is very easy to strip out .. It is short about 3 or four threads..

Sent from my iPhone

On Jul 3, 2012, at 6:04 PM, Scott Pavlock <f3aflyer7 at gmail.com> wrote:

> So it's my first time attempting to grease the gearbox on my Neu F3A, and I have a question about a specific part of the motor.
> 
> The area around the center of the motor where the main gear comes out is full of grease; quite a lot of it. Should I remove it all and re-pack it with the same amount of grease, or leave it like it is? I linked to a picture to explain where I am talking about: Click here for the picture of the greased area. I'm used to seeing a plastic washer cover this area in all of the pictures I have looked at, but it looks like the housing of the motor has taken its place.
> 
> Thanks!
> 
> Scott Pavlock
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120703/c2b3e183/attachment.html>