[NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

Tue Jan 10 18:28:02 AKST 2012

Or hold your Scotch in the free hand!

Sent from my Verizon Wireless Phone

----- Reply message -----
From: "Ronald Van Putte" <vanputte at cox.net>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?
Date: Tue, Jan 10, 2012 11:54 am
Well, geez Don.  You turn on the drill, lock it on, hold the drill between your knees and you have TWO hands to use on the file.
Ron (transplanted Yankee, now more Redneck than Yankee)
On Jan 10, 2012, at 12:41 PM, atwooddon at aol.com wrote:a drill press is way too sophisticated, i was thinking more along the lines of a hand held drill, electric of course, I haven't figured out how to hold the drill, crank the spindle and file all at one time......   

-----Original Message-----

From: Bob Kane <getterflash at yahoo.com>

To: General pattern discussion <nsrca-discussion at lists.nsrca.org>

Sent: Tue, Jan 10, 2012 9:40 am

Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

I thought a drill press was a lathe standing on end . . . .

Bob Kane

getterflash at yahoo.com

From: "atwooddon at aol.com" <atwooddon at aol.com>

To: nsrca-discussion at lists.nsrca.org 

Sent: Tuesday, January 10, 2012 11:39 AM

Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

Redneck lathe?  Been there, done that....  

Don

-----Original Message-----

From: trexlesh <trexlesh at msn.com>

To: General pattern discussion <nsrca-discussion at lists.nsrca.org>

Sent: Tue, Jan 10, 2012 8:20 am

Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

You could use the Tru-Turn bushings.....just put one on a bolt, chuck it in a drill and dress it with a file to size.

Rex

Sent from my Verizon Wireless Phone

----- Reply message -----

From: "Peter Vogel" <vogel.peter at gmail.com>

To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>

Cc: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>

Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

Date: Tue, Jan 10, 2012 7:16 am

The prop bore is currently 5/16" -- 7.66mm 

Sent from my iPhone4S

On Jan 9, 2012, at 8:49 AM, trexlesh at msn.com <trexlesh at msn.com> wrote:

What do you need for the bushing OD?

Rex

Sent from my Verizon Wireless Phone

----- Reply message -----

From: "Peter Vogel" <vogel.peter at gmail.com>

To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>

Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

Date: Sun, Jan 8, 2012 10:43 pm

I've found lots of bushings to adjust an APC prop hub to a smaller shaft, but I haven't found anything that seems like it would work with the Q60's 5mm bolt shaft...  looking for ideas... 

Thanks,

Peter+

-- 

Director, Fixed Wing Flight Training

Santa Clara County Model Aircraft Skypark

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120111/d4a49aeb/attachment.html>