[NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

Tue Jan 10 18:26:39 AKST 2012

You put it in your lap....using the TV as a light!

R

Sent from my Verizon Wireless Phone

----- Reply message -----
From: atwooddon at aol.com
To: <getterflash at yahoo.com>, <nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?
Date: Tue, Jan 10, 2012 10:41 am
a drill press is way too sophisticated, i was thinking more along the lines of a hand held drill, electric of course, I haven't figured out how to hold the drill, crank the spindle and file all at one time.......   

-----Original Message-----

From: Bob Kane <getterflash at yahoo.com>

To: General pattern discussion <nsrca-discussion at lists.nsrca.org>

Sent: Tue, Jan 10, 2012 9:40 am

Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

I thought a drill press was a lathe standing on end . . . .

Bob Kane

getterflash at yahoo.com

From: "atwooddon at aol.com" <atwooddon at aol.com>

To: nsrca-discussion at lists.nsrca.org 

Sent: Tuesday, January 10, 2012 11:39 AM

Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

Redneck lathe?  Been there, done that....  

Don

-----Original Message-----

From: trexlesh <trexlesh at msn.com>

To: General pattern discussion <nsrca-discussion at lists.nsrca.org>

Sent: Tue, Jan 10, 2012 8:20 am

Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

You could use the Tru-Turn bushings.....just put one on a bolt, chuck it in a drill and dress it with a file to size.

Rex

Sent from my Verizon Wireless Phone

----- Reply message -----

From: "Peter Vogel" <vogel.peter at gmail.com>

To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>

Cc: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>

Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

Date: Tue, Jan 10, 2012 7:16 am

The prop bore is currently 5/16" -- 7.66mm 

Sent from my iPhone4S

On Jan 9, 2012, at 8:49 AM, trexlesh at msn.com <trexlesh at msn.com> wrote:

What do you need for the bushing OD?

Rex

Sent from my Verizon Wireless Phone

----- Reply message -----

From: "Peter Vogel" <vogel.peter at gmail.com>

To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>

Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

Date: Sun, Jan 8, 2012 10:43 pm

I've found lots of bushings to adjust an APC prop hub to a smaller shaft, but I haven't found anything that seems like it would work with the Q60's 5mm bolt shaft...  looking for ideas... 

Thanks,

Peter+

-- 

Director, Fixed Wing Flight Training

Santa Clara County Model Aircraft Skypark

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120111/94d92a68/attachment.html>