[NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

[Keith Hoard]

Ya forgot about holding your beer, too.

Sent from my iPhone

On Jan 10, 2012, at 12:41, "atwooddon at aol.com" <atwooddon at aol.com> wrote:

a drill press is way too sophisticated, i was thinking more along the lines
of a hand held drill, electric of course, I haven't figured out how to hold
the drill, crank the spindle and file all at one time......


-----Original Message-----
From: Bob Kane <getterflash at yahoo.com>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Tue, Jan 10, 2012 9:40 am
Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker
Q60?

 I thought a drill press was a lathe standing on end . . . .

Bob Kane
getterflash at yahoo.com
  ------------------------------
*From:* "atwooddon at aol.com" <atwooddon at aol.com>
*To:* nsrca-discussion at lists.nsrca.org
*Sent:* Tuesday, January 10, 2012 11:39 AM
*Subject:* Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker
Q60?

 Redneck lathe?  Been there, done that....  [image: ;-)]

Don


 -----Original Message-----
From: trexlesh <trexlesh at msn.com>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Tue, Jan 10, 2012 8:20 am
Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker
Q60?

You could use the Tru-Turn bushings.....just put one on a bolt, chuck it in
a drill and dress it with a file to size.

Rex

Sent from my Verizon Wireless Phone

----- Reply message -----
From: "Peter Vogel" <vogel.peter at gmail.com>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Cc: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?
Date: Tue, Jan 10, 2012 7:16 am


The prop bore is currently 5/16" -- 7.66mm

Sent from my iPhone4S

On Jan 9, 2012, at 8:49 AM, trexlesh at msn.com <trexlesh at msn.com> wrote:

  What do you need for the bushing OD?

Rex

Sent from my Verizon Wireless Phone

----- Reply message -----
From: "Peter Vogel" <vogel.peter at gmail.com>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?
Date: Sun, Jan 8, 2012 10:43 pm


I've found lots of bushings to adjust an APC prop hub to a smaller shaft,
but I haven't found anything that seems like it would work with the Q60's
5mm bolt shaft...  looking for ideas...

 Thanks,
Peter+

 --
Director, Fixed Wing Flight Training
Santa Clara County Model Aircraft Skypark


   _______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing
listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  _______________________________________________
NSRCA-discussion mailing
listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 _______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120110/ded82d99/attachment.html>