[NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

[J N Hiller]

Peter I hate to see errors. I don't know where you got 7.66 mm.
5/16 = .3125" A good conversion factor is 25.4.
.3125 x 25.4 = 7.9375.
8 mm / 25.4 = .3149 5/16 is only .0025" over 5/16. Try the bushing Rex
mentioned yesterday.
Jim

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Peter Vogel
Sent: Tuesday, January 10, 2012 7:16 AM
To: General pattern discussion
Cc: General pattern discussion
Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker
Q60?

The prop bore is currently 5/16" -- 7.66mm

Sent from my iPhone4S

On Jan 9, 2012, at 8:49 AM, trexlesh at msn.com <mailto:trexlesh at msn.com>  <
trexlesh at msn.com <mailto:trexlesh at msn.com> > wrote:
What do you need for the bushing OD?

Rex

Sent from my Verizon Wireless Phone
----- Reply message -----
From: "Peter Vogel" < vogel.peter at gmail.com <mailto:vogel.peter at gmail.com> >
To: "General pattern discussion" < nsrca-discussion at lists.nsrca.org
<mailto:nsrca-discussion at lists.nsrca.org> >
Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?
Date: Sun, Jan 8, 2012 10:43 pm




I've found lots of bushings to adjust an APC prop hub to a smaller shaft,
but I haven't found anything that seems like it would work with the Q60's
5mm bolt shaft...  looking for ideas...

Thanks,
Peter+

--
Director, Fixed Wing Flight Training
Santa Clara County Model Aircraft Skypark

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120110/dd00361b/attachment.html>