[NSRCA-discussion] Drilling a hole

[Bob Richards]

Yes. At one time Fox sold them (I still have it somewhere).
 
The mult-step reamer only works well if one of the "steps" fits snugly inside the existing hole, otherwise the follwing step may not be properly centered. In that case I think I would use a drill press with regular drill bits.
 
Bob R.


--- On Wed, 1/4/12, Michael Ramsey <milehipilot at gmail.com> wrote:


From: Michael Ramsey <milehipilot at gmail.com>
Subject: Re: [NSRCA-discussion] Drilling a hole
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Wednesday, January 4, 2012, 4:50 PM


Is there such a thing as a metric step reamer?


On Wed, Jan 4, 2012 at 3:48 PM, Charlie Rock <charlierock at me.com> wrote:



Harry Higley I think Vicente... Charlie

Live each day as though it will be your last, because some day you will surely be right.        
Steve Jobs


On Jan 4, 2012, at 3:46 PM, "Vicente \"Vince\" Bortone" <vicenterc at comcast.net> wrote:






Scott,

I use the multi-step reamer.  I suggest to do this by hand or install it the reamer in the press and turn it by hand if you want to make sure is square.  I have been doing this by hand with not issues.  I got mine many years ago from Harry ?????.  Forgot how to spell his last name.  I think is hard to find now  


Vicente "Vince" Bortone



From: "Keith Hoard" <khoard at gmail.com>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, January 4, 2012 3:42:40 PM
Subject: Re: [NSRCA-discussion] Drilling a hole

I'd recommend starting with a SLIGHTLY SMALLER drill bit and then working your way to larger sizes . . . . 
.
You may find it doesn't work so well trying to drill a smaller hole starting with a larger one . . .
.
But things may work differently in Texas . . .<330.gif>


Keith Hoard
Collierville, TN
khoard at gmail.com

  Do you start at a size slightly larger than the diameter of the whole and then work my way up to 10mm for the Neu motor?. . .



-- 
Scott A. McHarg


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120104/e2748def/attachment.html>