[NSRCA-discussion] Arming Switch

[Dave Lockhart]

+1

 

Dave

 

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Keith Hoard
Sent: Sunday, February 12, 2012 2:44 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Arming Switch

 

I'd rather not cut a hole in my plane in the first place, or add another point of failure to the system. . . .

Keith Hoard
Collierville, TN
khoard at gmail.com





On Sun, Feb 12, 2012 at 1:37 PM, Ronald Van Putte <vanputte at cox.net> wrote:

You can mount a female Deans connector in a piece of thin plywood, use Pacer Pro Zap to glue the Deans connector to the plywood and, after cutting an appropriate hole in the side of the fuselage, glue the assembly inside the fuselage.  Use a male Deans connector with the leads soldered together as an arming plug.

 

Or you can buy a SharpRC SafeArm (http://www.sharprc.com/catalog/index.php?cPath=43)

 

Being cheap, I do the former.

 

Ron Van Putte

  

On Feb 12, 2012, at 11:55 AM, Ron Hansen wrote:

 

What are the available arming switch options?

 

Thanks

 

Ron



__________ Information from ESET Smart Security, version of virus signature database 6877 (20120211) __________

The message was checked by ESET Smart Security.

http://www.eset.com

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120212/b78aa143/attachment.html>