[NSRCA-discussion] Immediate?

[Marcelo Vélez]

The model has to "bump" in knife edge from one direction to the opposite. It is absolutely clear in the code as well as in the powerpoints that there should be no line between 1/4 roll reversals. It has to change directions right in front of the pilot.

Marcelo

Enviado desde mi iPhone

El 24/04/2012, a las 14:34, "Phil S." <chuenkan at comcast.net> escribió:

> There ya go again, Georgie, using LOGIC again, FGS!!!!!  C'mon, Man...
> 
> On 4/24/2012 3:12 PM, George Kennie wrote:
>> 
>> <<<In P-13.03 - there is no pause between the end of the 1st three 1/4 rolls and the start of the second set of 1/4 rolls - the reversal must be immediate.>>>
>>  
>> Just wondering if there are different interpretive values for "Immediate"?
>> To me, it would make more sense to make the time interval value between the reversal of the two segments
>> equal to the hesitation value utilized at each point, thereby making for a uniform realization of inputs throughout
>> the complete maneuver.
>> But then again, what do I know?  
>> G.
>> 
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> -- 
> Phil Spelt, KCRC President
> AMA 1294 Scientific Leader Member
> SPA 177 Board Member
> (865) 435-1476v, (865) 604-0541c
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120425/345abd5e/attachment.html>