[NSRCA-discussion] 3D Printed UAV Article...

[Bob Richards]

I've seen something similar, however, I doubt you would be able to apply much torque with that printed wrench. The 3D printers are limited by the material they can print with.

--- On Thu, 9/15/11, ronlock at comcast.net <ronlock at comcast.net> wrote:


From: ronlock at comcast.net <ronlock at comcast.net>
Subject: Re: [NSRCA-discussion] 3D Printed UAV Article...
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Thursday, September 15, 2011, 9:11 AM



#yiv963582319 p {margin:0;}


Jay Leno visited a machine shop where they demo'd printing of a cresent wrench.
The printing process made the wrench with the moving adjustable parts already assembled.
They did not mention how long it took the printer.
 
Ron Lockhart





From: "Keith Hoard" <khoard at gmail.com>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, September 14, 2011 4:10:49 PM
Subject: Re: [NSRCA-discussion] 3D Printed UAV Article...

I read an article where "they" are trying to develop the technology to 3D print a house.  

Keith Hoard
Collierville, TN
khoard at gmail.com





On Wed, Sep 14, 2011 at 1:58 PM, Richard Lewis <humptybump at sbcglobal.net> wrote:




There was a recent discussion here regarding 3D printers, etc....I saw this article and thought it might be of interest to some of you...
 
http://machinedesign.com/article/world-s-first-3d-printed-uav-0908
 
Richard
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110919/4ec5daef/attachment.html>