[NSRCA-discussion] Field Charging Battery Box

[Ron Hansen]

I posted pictures of my charge box on RCU.

 

http://www.rcuniverse.com/forum/m_10540629/tm.htm

 

 

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Glen Watson
Sent: Wednesday, May 25, 2011 7:07 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Field Charging Battery Box

 

Tim,

 

I was advised by a friend to use the following
http://www.powerwerx.com/west-mountain-radio/rigrunner-4005.html which I
did...it's fuse protected and can handle the current capacity my two TP 1010
chargers from the Iota 55 power supply. From this same company you can order
custom length cables and gauge of your choice with Power Pole connecters
already attached if you don't want to invest in an assortment of connectors
and the crimping tool.

 

Regards,

 

Glen Watson

http://glenwatson.blogspot.com/

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Pascoe,Tim
[Burlington]
Sent: Wednesday, May 25, 2011 3:06 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Field Charging Battery Box

Thanks Glenn. Any idea where the blue power distribution panel came from in
the 2-charger layout? I’ve seen them in another post, but don’t have any
source info for them.

 

Timothy Pascoe 
Physical Sciences Specialist

 

Yak Shaving - Any seemingly pointless activity which is actually necessary
to solve a problem which solves a problem which, several levels of recursion
later, solves the real problem you're working on

 

Environment Canada / Environnement Canada
Canada Centre for Inland Waters / Centre Canadien des Eaux Intérieures
867 Lakeshore Road / 867, chemin Lakeshore
Burlington, Ontario / Burlington (Ontario) 
L7R 4A6

Tel/Tél: (905) 336-6239
Fax/Téléc: (905) 336-4609
E-mail/C. élec:  <blocked::mailto:tim.pascoe at ec.gc.ca> tim.pascoe at ec.gc.ca
Government of Canada/Gouvernement du Canada 
This e-mail represents the opinions and views solely held by its author and
in no manner may be considered as representing those of his/her employer.

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Glen Watson
Sent: Wednesday, May 25, 2011 3:29 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Field Charging Battery Box

 

Tim,

 

Got to the following site http://www.electric-f3a.com/, in the middle
section of the homepage scroll down until you see the link on building a
custom charge box.

 

Regards,

 

Glen Watson

http://glenwatson.blogspot.com/

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Pascoe,Tim
[Burlington]
Sent: Wednesday, May 25, 2011 2:09 PM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Field Charging Battery Box

I’m starting the process of collecting all the pieces required to build a
self-contained field charge box. I’m using an Iota power supply and FMA 10S
charger, but really I’m looking for case designs regardless of the gear
used. I surfed around RCUniverse, but only found a couple of short threads.
If you have a build thread from a forum, please pass it along, or any pics
you might have of your own designs.

 

I’m looking for as many ideas as I can find before I jump in! If this was
covered in the past, I apologize – I’m a new convert to e-power for pattern
and may have missed it in the past.

 

Thanks,

 

Tim Pascoe 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110526/ee61a14c/attachment.html>