[NSRCA-discussion] Servo centering/tester

[Dennis Bodary]

Jr MatchMaker will center the servos. It has two ports one for centering the servos. you just put the dial in the middle. The other two ports are for checking servos the dial controls the speed. I got this idea from Troy Newman. The matchmaker also works well for checking pots as you can set the speed to slow and look for any dead spots or chattering.

--- On Tue, 5/17/11, Doug Cronkhite <seefo at san.rr.com> wrote:

From: Doug Cronkhite <seefo at san.rr.com>
Subject: Re: [NSRCA-discussion] Servo centering/tester
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Cc: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Tuesday, May 17, 2011, 1:43 PM

I don't think that's what he meant.


Sent from my iPhone
On May 17, 2011, at 10:38 AM, Dennis Bodary <d_bodary at yahoo.com> wrote:

JR MatchMaker Part#JRPA915

--- On Tue, 5/17/11, Mark Atwood <atwoodm at paragon-inc.com> wrote:

From: Mark Atwood <atwoodm at paragon-inc.com>
Subject: [NSRCA-discussion] Servo centering/tester
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Tuesday, May 17, 2011, 1:31 PM

Does anyone use a simple servo centering device when installing servo's short of hooking up the Tx and Rx?   I know there's a variety of servo testers that will center the servo, just looking for the best/least expensive setup.  Any suggestions?  I'm always scrambling to find a battery/regulator/Rx and then bind it and set it up just to
 center a servo.
thanks!


Mark AtwoodParagon Consulting, Inc.  |  President5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124 Phone: 440.684.3101
 x102  |  Fax: 440.684.3102mark.atwood at paragon-inc.com  |  www.paragon-inc.com






-----Inline Attachment Follows-----

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-----Inline Attachment Follows-----

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110518/6f551416/attachment.html>