[NSRCA-discussion] Abbra landing gear needed (electric)

[Bob Lavey]

Thanks a lot to everybody who replied.  I've got a ton of good resources for
landing gear :)  Thanks especially to Don Atwood, who had an original set of
electric Abbra gear that he was willing to part with.

Bob

> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-
> bounces at lists.nsrca.org] On Behalf Of Ron Van Putte
> Sent: Saturday, January 15, 2011 9:40 PM
> To: General pattern discussion
> Subject: Re: [NSRCA-discussion] Abbra landing gear needed (electric)
> 
> Be sure to check out Graph Tech too (http://www.graphtechrc.com/).
> 
> Ron
> 
> On Jan 15, 2011, at 6:23 PM, Mike Howard wrote:
> 
> > Bob, I think F3A unlimited carries the gear that replaced the Bolly
> > stuff, and its better and I believe a couple of inches longer than
> > your present gear.
> >
> >
> > Mike
> >
> > --- On Sat, 1/15/11, Bob Lavey <bob.lavey at cox.net> wrote:
> >
> > From: Bob Lavey <bob.lavey at cox.net>
> > Subject: [NSRCA-discussion] Abbra landing gear needed (electric)
> > To: nsrca-discussion at lists.nsrca.org
> > Date: Saturday, January 15, 2011, 9:46 PM
> >
> > I'm converting my Abbra from YS 160 power to electric, and since
> > the landing
> > gear I have is barely long enough for an 18" prop, there's no way
> > it's going
> > to work for at 21" prop.  Does anyone have a set of gear for that
> > plane that
> > they'd part with?
> >
> > Thanks,
> > Bob
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion