[NSRCA-discussion] exhaust temp of a ys 1.75

[Jay Marshall]

Would JBWeld work?

 

Jay Marshall

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Randy Forbus
Sent: Saturday, December 10, 2011 6:13 PM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] exhaust temp of a ys 1.75

 

thats  probably a good idea that durafix is low temp repair, I did fix a
muller header with it though

  _____  

From: jh102649 at speakeasy.net
Date: Sat, 10 Dec 2011 15:52:42 -0700
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] exhaust temp of a ys 1.75

Mike - 

 

The aluminum in our mufflers and headers is very thin. Unless you are really
good at joining thin sections I would take it to a machine shop. Here in New
Mexico I have had good luck. Once I find a shop that can do the job I talk
directly to the craftsman. Most of these jobs take only a few minutes and
for $10 or $15 bucks they are usually willing to do it on their lunch hour.
Doing it through the shop itself is ok too, you'll probably pay the shop's
minimum.

 

Jeff Hill

On Dec 10, 2011, at 3:08 PM, Michael S. Harrison wrote:

 

(For all of you out there, can anyone tell me the exhaust temp approximately
of a YS 1.75.  I am building a Xurama and the muffler has to be
shortened(tuny's build thread).  I nedd to know if anyone has knowledge how
to solder aluminum and if you might have a site that would help me.  I
believe that there is a flus and an aluminum solder to do that.  please let
me know if you have any info on that.

Thanks

Mike  

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 


_______________________________________________ NSRCA-discussion mailing
list NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20111211/06812295/attachment.html>