[NSRCA-discussion] Sebart hinge point hinges

[Bob Kane]

Thanks Arch, I will stick with the stock hinges.

Bob Kane

getterflash at yahoo.com

--- On Wed, 8/3/11, Archie Stafford <astafford at md.metrocast.net> wrote:

From: Archie Stafford <astafford at md.metrocast.net>
Subject: Re: [NSRCA-discussion] Sebart hinge point hinges
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Wednesday, August 3, 2011, 7:32 PM

Bob
No problems on either of mine. Just make sure you get plenty of glue in the holes. 
Arch

Sent from my iPhone
On Aug 3, 2011, at 7:06 PM, Andrew Jesky <Andrew.Jesky at soaringsoftware.com> wrote:

Bob,
I used the stock hinges on my plane as well as the one for the worlds fundraiser plane. No issues to report.
Andrew 

Sent from my iPhone
On Aug 3, 2011, at 9:03 AM, "Bob Kane" <getterflash at yahoo.com> wrote:

For those of you that have assembled the Sebart Wind S Pro, did you use the supplied hinges or replace them with something else?  Thanks.

Bob Kane

getterflash at yahoo.com_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-----Inline Attachment Follows-----

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110804/dd951d35/attachment.html>