[NSRCA-discussion] Elevator servo

[Dave]

Jon,

 

3421 w/ 3025 gears compared to 3517..specs are very close.not sure what
other differences there might be so far as motor, deadband, aggressiveness
on center, etc.

 

Dave

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jon Lowe
Sent: Thursday, October 14, 2010 12:33 PM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] Elevator servo

 

Dave, 

I've been using 3421's with 3025 gears.  Slightly lower torque, but much
faster for dual elevator servos.  Specs appear about the same a

Jon Lowe

 

-----Original Message-----
From: Dave <DaveL322 at comcast.net>
To: 'General pattern discussion' <nsrca-discussion at lists.nsrca.org>
Sent: Thu, Oct 14, 2010 10:54 am
Subject: Re: [NSRCA-discussion] Elevator servo

8417 for one elevator servo
3517 for two elevator servos
8611A for rudder
 
8231 or 8101 nylon gearsets to convert the 8417 to 8417 "sa".......the speed
will decrease slightly, but the torque will go up slightly.
 
3025/3035 nylon gearsets to convert the 3517 to "sa".
 
Leave the 8611A as is.
 
Regards,
 
Dave Lockhart
Team Horizon/JR
 
 
 
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org
<mailto:nsrca-discussion-bounces at lists.nsrca.org?> ] On Behalf Of Duane Beck
Sent: Thursday, October 14, 2010 10:50 AM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Elevator servo
 
I plan to move up to my first 2M soon (a Focus 2) and will need an elevator
(and rudder) servo.  What can you recommend, now that JR's SA servos appear
to be no longer available?  If necessary, I may be able to scavange an
8411SA or two from an unfinished 1/4 scale, but have to check if it's the SA
or metal gear version.
 
Duane
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20101014/7763b273/attachment.html>