[NSRCA-discussion] Elevator servo

[verne at twmi.rr.com]

Duane,
It's not hard to convert an 8411, 3421, or 9411 into the former SA version. In each case, you leave the metal main output gear in place and replace the rest of the metal gears with the appropriate nylon gears. For the 8411, you need a set of gears for an 8101. They're about $4.00 a set. I can't remember the part numbers for the gear sets, but I'm sure someone here will respond shortly with the part numbers you need. Hope this helps.

Verne Koester


---- Duane Beck <duane.e.beck at comcast.net> wrote: 

=============
I plan to move up to my first 2M soon (a Focus 2) and will need an elevator (and rudder) servo.  What can you recommend, now that JR's SA servos appear to be no longer available?  If necessary, I may be able to scavange an 8411SA or two from an unfinished 1/4 scale, but have to check if it's the SA or metal gear version.

Duane
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion