[NSRCA-discussion] Help Needed

[Phil Spelt]

My advice precisely!!! lol
At 20:12 2010/10/01, you wrote:
>Get a JR?  You left yourself wide open....
>
>Jon Lowe
>
>
>-----Original Message-----
>From: Ron Van Putte <vanputte at cox.net>
>To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
>Cc: Houston Schweitzer <wingmanp_47 at yahoo.com>
>Sent: Fri, Oct 1, 2010 6:06 pm
>Subject: [NSRCA-discussion] Help Needed
>
>Houston Schweitzer has a Futaba 9ZAP transmitter with a Futaba 
>8-channel 2.4 GHz module in it. He wants to use it with a Futaba 
>R617 receiver, so he put the switch on the module in the 7-channel 
>position and made sure that the parameter setting was PPM in the 
>transmitter's model programming, but the transmitter/receiver system 
>doesn't work. Any ideas?
>
>Ron Van Putte
>
>_______________________________________________
>NSRCA-discussion mailing list
><mailto:NSRCA-discussion at lists.nsrca.org>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-->There are only two types of aircraft -- fighters and targets.

Phil Spelt, Past President, Knox County Radio Control Society, Inc.
        URL: http://www.kcrctn.com
AMA--1294,  Scientific Leader Member  SPA--177, Board Member
       My URL: http://mywebpages.comcast.net/~chuenkan/
       (865) 435-1476 v  (865) 604-0541 c  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20101002/f5d1dfc5/attachment.html>