[NSRCA-discussion] Wing profile for 2x2

[Koenig, Tom]

Hi all and Aviv,

I didn't look at your link, but I have drawn a few planes over the years.

Have a look at the plain old NACA 0010 ( or other suitable thickness). Also the SD 8020 or the NACA 65 1(A), the latter of which I have used the last so many years with good success.

Enjoy and good luck designing-we need more designs out there!

Tom

________________________________
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Aviv Shoval
Sent: Saturday, 20 November 2010 8:15
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Wing profile for 2x2

Im looking for recommendation for a wing profile for a 2x2 airframe.
Hope to be able to download from UIUC (http://www.ae.illinois.edu/m-selig/ads/coord_database.html#R) and import to my CAD to fooling around. Its winter time..


________________________________
************************************************************************
*PLEASE NOTE* This email and any attachments may
be confidential. If received in error, please delete all
copies and advise the sender. The reproduction or
dissemination of this email or its attachments is
prohibited without the consent of the sender.

WARNING RE VIRUSES: Our computer systems sweep
outgoing email to guard against viruses, but no warranty
is given that this email or its attachments are virus free.
Before opening or using attachments, please check for
viruses. Our liability is limited to the re-supply of any
affected attachments.

Any views expressed in this message are those of the
individual sender, except where the sender expressly,
and with authority, states them to be the views of the
organisation.
************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20101123/028a6679/attachment.html>