[NSRCA-discussion] Answered - Pulse Width for 'center' on JR radios

[Bob Richards]

I measured the Futaba at 0.922ms minimum to 2.12ms maximum.

--- On Fri, 11/19/10, James Oddino <joddino at socal.rr.com> wrote:


From: James Oddino <joddino at socal.rr.com>
Subject: Re: [NSRCA-discussion] Answered - Pulse Width for 'center' on JR radios
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Friday, November 19, 2010, 12:39 PM


What was the answer?  Close enough?


What is the total range on each system? I believe the Futaba is .9 to 2.1.  


Jim






On Nov 17, 2010, at 11:06 AM, atwooddon at aol.com wrote:



I finally found the info on RC Groups so please ignore the request.
 
thanks
Don
 

In a message dated 11/17/2010 9:43:56 A.M. Pacific Standard Time, AtwoodDon at aol.com writes:

Is the 'center' pulse width on JR radios the same as Futaba?  1.5ms?
 
I can't seem to find this info online anywhere.  I am installing radio gear in a plane for a friend using JR equipment and I want to make sure center is the same on my Futabas when I set all the surfaces to center.
 
thanks
Don

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20101120/354f8a0d/attachment.html>