[NSRCA-discussion] Answered - Pulse Width for 'center' on JRradios

Ed Alt ed_alt at hotmail.com
Fri Nov 19 14:03:19 AKST 2010


Mark:
The small difference art center is likely just due to pot wear.

Ed

From: AtwoodDon at aol.com 
Sent: Friday, November 19, 2010 1:11 PM
To: nsrca-discussion at lists.nsrca.org 
Subject: Re: [NSRCA-discussion] Answered - Pulse Width for 'center' on JRradios

Looks like there may be a .02ms difference in center.  Total throw including ATV and trim comes out nearly the same.   1.5ms is close enough for me.  That's what they make sub-trim for... 

Don

In a message dated 11/19/2010 9:40:20 A.M. Pacific Standard Time, joddino at socal.rr.com writes:
  What was the answer?  Close enough? 

  What is the total range on each system? I believe the Futaba is .9 to 2.1.  

  Jim



  On Nov 17, 2010, at 11:06 AM, atwooddon at aol.com wrote:


    I finally found the info on RC Groups so please ignore the request.

    thanks
    Don

    In a message dated 11/17/2010 9:43:56 A.M. Pacific Standard Time, AtwoodDon at aol.com writes:
      Is the 'center' pulse width on JR radios the same as Futaba?  1.5ms?

      I can't seem to find this info online anywhere.  I am installing radio gear in a plane for a friend using JR equipment and I want to make sure center is the same on my Futabas when I set all the surfaces to center.

      thanks
      Don


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


--------------------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20101119/7b5bcebe/attachment.html>


More information about the NSRCA-discussion mailing list