[NSRCA-discussion] Servicing Servos

Tony tony at radiosouthrc.com
Mon May 17 09:36:08 AKDT 2010


Generally.  Sometimes a poor fitting cam or even a motor can be required.  I
usually don't deal with motors, as their cost (>$50!) makes it cheaper to
get another servo.

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of colin
chariandy
Sent: Monday, May 17, 2010 1:26 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Servicing Servos

 


Thanks Tony.

 

Is the Pot replacement the only work needed to recover the performance and
give another 100-200 flights?

 

Colin

--- On Mon, 5/17/10, Tony <tony at radiosouthrc.com> wrote:


From: Tony <tony at radiosouthrc.com>
Subject: Re: [NSRCA-discussion] Servicing Servos
To: "'General pattern discussion'" <nsrca-discussion at lists.nsrca.org>
Received: Monday, May 17, 2010, 12:44 PM

Colin:
I do a lot of competition pattern servos here at Radio South.  Most of the
time, you will be able to get 100-200 flights on servos, however there are
some that say they can feel degradation of centering in as few a 30 flights.
Most of the time, replacing a pot will cost you around $20 per servo.

 

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA   31525

1-800-962-7802

www.radiosouthrc.com

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of colin
chariandy
Sent: Monday, May 17, 2010 12:12 PM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] Servicing Servos

 


Generally, are people servicing their servos? How often (for glow powered
airplanes) and does the service correct chatter about the centre?

 

Where is a good place to send Futaba Servos and what's the typical cost and
turn around time?

 

Thanks

Colin.

 


-----Inline Attachment Follows-----

_______________________________________________
NSRCA-discussion mailing list
 
<http://ca.mc1126.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.
org> NSRCA-discussion at lists.nsrca.org
 <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100517/2c4c74a9/attachment.html>


More information about the NSRCA-discussion mailing list