[NSRCA-discussion] Need Dremel Part

Wed Jul 7 16:04:09 AKDT 2010

C’mon Mark
.you should know RVP is way too smart to fall for trite flattery
a mere week and half before the NATS  <G>

Given the praise you have for RVP, maybe you should have him check for
flight readiness of both your airplanes before each flight this
year
..doh!!!!

Dave

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Atwood, Mark
Sent: Wednesday, July 07, 2010 3:42 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Need Dremel Part

One last point of clarification and then we should probably either talk
about Dremel Parts or let this thread die
.

As much as I LOVE to spar with RVP and continuously dig him on about being
older than the dead sea, I have to say it’s with much respect for having
read a decade worth of every word he wrote for Model Aviation, an even
larger respect for an Aeronautical Engineering degree (I’m an EE) that’s
he’s had in practice all those centuries (not to mention must have acquired
prior to the invention of flight, no small feat),  and lastly as a role
model for someone that still knows how to have fun, loves the sport of
modeling, and despite what Dave Lockhart says about him, isn’t such a bad
guy.

Oh and Ron, I’m flying FAI
 sooooo, yeah, you’ll probably be judging me :-)

Mark Atwood

Paragon Consulting, Inc.  |  President

5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124 

Phone: 440.684.3101 x102  |  Fax: 440.684.3102

mark.atwood at paragon-inc.com  |  www.paragon-inc.com
<http://www.paragon-inc.com/> 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ronald Van
Putte
Sent: Wednesday, July 07, 2010 3:27 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Need Dremel Part

OK.  Just to keep the record straight, Houston does assist me with some apps
on my Droid, but you should ask Houston who he asks when he needs help with
his OS 1.40RX.

Ron VP 

On Jul 7, 2010, at 2:19 PM, Phil Spelt wrote:

VERY well said, Jon...

At 09:38 AM 7/7/2010, you wrote:

Jon Lowe

-----Original Message-----
From: Ron Van Putte <vanputte at cox.net>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Wed, Jul 7, 2010 8:25 am
Yeah, but if you didn't have Houston Schweitzer around, you wouldn't know
how to use that Droid!  Everytime you want to do something, you hand it to
him!!

Jon

To get the record straight: I retired from the USAF in 1979, from Civil
Service in 1997 and started collecting Social Security the same year. You
youngsters will never see Social Security, so I thank each and every one of
you for my monthly check. 

Now about keeping up with the times: My cell phone is a Droid Incredible.
What's yours whippersnapper? 

Ron VP 

On Jul 7, 2010, at 8:12 AM, Atwood, Mark wrote: 

> Better screws on the coffin lid?? 
> 
> Seriously though, as one who still has my Dremel from 1973 (I know, > you
were already retired then right??) I finally broke down and > bought a new
one and have been wondering why I waited so long. The > newer cordless
lithium powered units rock. Take the plunge... 
> 
> Mark Atwood 
> Paragon Consulting, Inc. | President 
> 5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124 
> Phone: 440.684.3101 x102 | Fax: 440.684.3102 
> mark.atwood at paragon-inc.com | www.paragon-inc.com
<http://www.paragon-inc.com /> 
> 
> 
> -----Original Message----- 
> From: nsrca-discussion-bounces at lists.nsrca.org [
<mailto:nsrca-%3E%20discussion-bounces at lists.nsrca.org>  mailto:nsrca->
discussion-bounces at lists.nsrca.org] On Behalf Of Ron Van Putte 
> Sent: Tuesday, July 06, 2010 2:58 PM 
> To: General pattern discussion 
> Subject: [NSRCA-discussion] Need Dremel Part 
> 
> I have an old Dremel Freewheeler Model 850 that has a flexible 
> coupler between the motor and the output shaft. This coupler is 
> splined on the inside and the splines finally wore out after 20+ 
> years for no reason at all. It's on its third or fourth battery 
> pack, but still worked fine before the coupler gave out. I've tried 
> searching sources for Dremel parts but can't find what I need. I 
> would just buy a new one, but I am stubborn and the son of a Scottish 
> mother, who would rise up out of her grave if I did. 
> 
> Any ideas? 
> 
> Ron Van Putte 
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
<http://lists.nsrca.org/mailman/listinfo/nsrca-discussion%A0>  
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
<http://lists.nsrca.org/mailman/listinfo/nsrca-discussion%A0>  

_______________________________________________ 
NSRCA-discussion mailing list 
NSRCA-discussion at lists.nsrca.org 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
<http://lists.nsrca.org/mailman/listinfo/nsrca-discussion%A0>  
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

--> There are only two types of aircraft -- fighters and targets.

Phil Spelt, Past President, Knox County Radio Control Society, Inc.
       URL: http://www.kcrctn.com <http://www.kcrctn.com/> 
AMA--1294,  Scientific Leader Member  SPA--177, Board Member
      My URL: http://mywebpages.comcast.net/~chuenkan/
      (865) 435-1476 v  (865) 604-0541 c 

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100708/76fc73d8/attachment.html>