[NSRCA-discussion] 3/4" Coupler source

[colin chariandy]

Thanks!!

--- On Tue, 7/6/10, rcmaster199 at aol.com <rcmaster199 at aol.com> wrote:


From: rcmaster199 at aol.com <rcmaster199 at aol.com>
Subject: Re: [NSRCA-discussion] 3/4" Coupler source
To: nsrca-discussion at lists.nsrca.org
Received: Tuesday, July 6, 2010, 10:18 AM



http://www.siliconehose.com/commerce/ccp11370-870id4-ply-silicone-saej20-compliantgl-c40-087.htm
 
Look for Turbo Hose. You buy on-line, direct from the factory; about $0.80/inch. Turnaround is about 1 week
 
MattK



-----Original Message-----
From: colin chariandy <cchariandy at yahoo.ca>
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
Sent: Tue, Jul 6, 2010 7:11 am
Subject: [NSRCA-discussion] 3/4" Coupler source







Other than MacMaster, is there a place I can find 3/4ID header couplers in a hurry?
 
I'm going to need a replacement before the NATs.
 
Thanks
Colin.

_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100706/b4249c3f/attachment.html>